- 7 - HOBOT Technology Inc.
How to clean caterpillar belt
When the device easily slips on the surface of the window, it is because belts are
stained with accumulation of dust and water after each use. It is highly
recommend cleaning caterpillar belts before putting the device away.
Please follow 3 steps below.
Step 1: Turn the device upside down.
Step 2: Turn power switch on, the device’s caterpillar belts continually rotate for 3
minutes.
Step 3: Customers use cloth clean caterpillar belts and keep cloth in the middle
of belts to avoid cloth being jammed in the belts. If cloth is jammed, users
can turn power switch off and draw it out.
UPS (Uninterrupted Power System) function
(1) The UPS function will be enabled automatically when no electric power is
supplied. The backup time of this UPS is 20 minutes.
(2) If no electric power is supplied, the device will stop automatically, sound an
alert, and flash a red light. The user should take the device down from the glass
as soon as possible.
(3) The safety rope can be used to pull the device back. Gently pull the safety rope
at an angle close to the glass to prevent it from falling off.
How to clean the glass
Microfiber dry-cleaning cloth : it is specifically used for dry clean to wipe partial
dust, dirt off the outside of windows because of its lower friction and poorer water
absorbency.
Microfiber polishing cloth : it can be used for wet or dry clean and suitable for
dust-free exterior windows and interior windows due to its higher friction factor
and better water absorbency.
To Next Page
Loading...
