HOFFEN EN
Hoffen 36
9. Make sure that the air tube is not bent or pressed.
10. Stay in this position for two minutes before starting the measurement.
TAKING A MEASUREMENT
Once the cuff is correctly positioned on the arm, the pressure measurement can be
started. After the correct measurement, the result will be stored automatically. The
device memory can store up to 192 results for each of the two users. Select memory
for users and is made before starting the measurement when the device
is switched off by pressing the button as many times as necessary to select the
correct memory.
The following phases of the measurement are shown in the illustrations below.
To Next Page
Loading...