HOFFEN EN
Hoffen 37
Press button "ON/OFF".
All symbols in the display switch on for 1 second.
The screen in the DIA column should display "0" (zero), which
means that the blood pressure monitor is ready to start
measuring.
The measurement will start automatically by inflating the cuff.
The cuff is pumped up to 180-190 mmHg
as standard. If a higher pressure is required to take the
measurement, the device increases the pressure to the
optimum value.
If a value of more than 200 mmHg is required, it can be
increased by pressing the button . Each use increases the
air pressure by 20 mmHg.
The maximum pressure to which the cuff can be inflated is
280 mmHg. We recommend that the cuff inflation value
should be a maximum of 20-30 mmHg higher than expected measurement value.
To Next Page
Loading...