HOFFEN EN
Hoffen 38
A rising pressure value will appear on the display until the
maximum cuff inflation value is reached.
CAUTION! If you are experiencing major discomfort
during cuff inflation, or if the cuff inflation does not end
when the set top value is reached, immediately release and
remove the cuff and switch off the device with the "On/Off"
button.
When you start deflation of the cuff, a symbol will appear
indicating that a pulse has been detected.
When the measurement is completed correctly, the screen will
display the values - from top: systolic (SYS - in this case 128
mmHg), distolic (DIA - in this case 78 mmHg) and pulse (PULSE
- in this case 72 times per minute) The result of the correct
measurement will be stored in the memory determined for the
user.
If the user does not sit still during the measurement (moves the
entire body or the hand on which the cuff is placed), a symbol
may appear on the screen. This means that the measurement is incorrect and
must be repeated. We recommend resting for at least 3 minutes and re-measuring.
If the measurement shows an irregular heartbeat, the symbol will be displayed.
Irregular heartbeat is a condition where the heartbeat is 25% slower or faster than the
average heartbeat measured during systolic and diastolic blood pressure
measurement. We recommend resting for at least 3 minutes and re-measuring. If the
symbol appears again, it is necessary to contact your doctor.
Remove the cuff after the measurement is taken. Switch off the unit by pressing the
"ON/OFF" button. The device can also be left standing and will turn off automatically
after 2 minutes.
To Next Page
Loading...