*Max Payload: 150g
*The camera holder supports the max. width of actioncam 48 mm, max. thickness 32mm.
*Supported cameras: GoPro Hero 8/ 7/6/5/4/3, DJI OSMO Action, SONY RX0, YI, SJCAM,and other
action camera with similar size and weight.
Mounting the Actioncam
Put the tilt motor to the LEFT side, place action camera closely to the back clip as
picture and tighten the knob to secure its position. Double tighten by 2 long screws
against violent movement.
* Do not turn on the gimbal without a actioncam mounted on.
06
To Next Page
Loading...
