76 Instruments and controls
4. Press SET/CLR.
5. After a few seconds a
conrmation screen is displayed.
Recalibration
Warning
Recalibrating the compass
requires the vehicle to be driven
in circles.
Only perform this procedure in an
area clear of trafc, pedestrians
and obstacles and drive slowly
while maintaining a view of the
surrounding area.
1. Rotate the adjuster wheel to
highlight Recalibration.
2. Press SET/CLR.
1. Rotate the adjuster wheel to
highlight Zone.
2. Press SET/CLR.
3. Rotate the adjuster wheel to
change the zone number.
To Next Page
Loading...
