Version 1.0 3
I. Disclaimer & Warranty
• The intellectual property rights for this manual belongs to Holland Green Science
Corporation (hereinafter referred to as “the Company”).
• Products of the company are under the patent protection of China and other
countries and regions (inclusive of obtained patents and patents currently under
application).
• The company reserves the right to change product specifications without notice.
• The contents of this manual are subject to change without notice.
• The manual’s content must not be copied, extracted, or modified in any form without
the Company’s permission.
LIMITED WARRANTY & DISCLAIMER
Products sold by the Company are intended solely for the use(s) specified by the
manufacturer and are not to be used for any other purposes including, but not limited to,
unauthorized commercial purposes. Buyer warrants and represents that Buyer will properly
test, use, qualify, and/or validate each Product for intended use, and, to the extent
authorized, manufacture and market any final articles made from the Company’s Products in
accordance with the practices of a reasonable person who is an expert in the field, and in
strict compliance with all applicable national, state and local laws and regulations. Buyer
acknowledges and understands that the purchase of Products only conveys to Buyer the
non-transferable right for only the Buyer to use the Products purchased in compliance with
the applicable manufacturer's Published User Statement, Limited User Statement, or Limited
License, if any. While this manual contains certain representations of the potential dangers
from the instrument or equipment, Buyer is solely responsible for conducting any research
necessary to learn the hazards involved for any of its intended uses of the instrument or
equipment purchased from the Company and to properly warn its customers, employees and
other personnel who may be exposed to such instrument or equipment of any risks involved
in using or handling the instrument or equipment.
The Company warrants that this product will operate or perform substantially in conformance
with the Company’s published specifications and be free from defects in material and
workmanship, when subjected to normal, proper and intended storage and usage by
properly trained personnel, for the duration of the manufacturer’s warranty period set forth in
this product documentation, published specifications or package inserts. If a manufacturer’s
warranty period is not specified in the product documentation, published specifications or
package inserts, the warranty period shall be one (1) year from the date of Bill of Sale to
Buyer for equipment, and the earlier of any stated expiration dates or ninety (90) days for all
other products (the "Warranty Period"). The Company agrees during the Warranty Period, to
repair or replace, at the Company’s option, defective Products so as to cause the same to
operate in substantial conformance with said published specifications; provided that Buyer
shall (a) promptly notify the Company in writing upon the discovery of any defect, which
notice shall include the product model and serial number (if applicable) and details of the
warranty claim; and (b) after the Company's review, the Company will provide Buyer with
service data and/or a Return Material Authorization ("RMA"), which may include biohazard
decontamination procedures and other product-specific handling instructions, then, if
applicable, Buyer may return the defective Products to the Company with all costs prepaid
by Buyer. Replacement parts may be new or refurbished, at the election of the Company. All
replaced parts shall become the property of the Company. Shipment to Buyer of repaired or
replacement Products shall be made in accordance with the Delivery provisions of the Terms
To Next Page
Loading...
Need help?
General