15
9.3 Important additional user information
9.3.1 Hoses
The hydraulic hoses that make up the
hydraulic system need attention. Observe the
following points:
1. Do not use hoses without proper anti-kink devices and prevent kinking behind the
attachment.
2. Prevent kinking of the hoses and never bend the hoses beyond their minimum bending
radius 89 mm (3 ½”).
3. Do not pull the hoses to move tools or pumps.
4. Prevent twisting of the hose.
5. Do not use the hoses to keep the equipment in position and especially not if the hoses
are pressurized.
6. Do not store hoses with the ends coupled together.
To Next Page
Loading...
