Holmatro DPU31 - Detailed Maintenance Schedule; Maintenance Schedule Table

22
12.4 Maintenance schedule
Follow the maintenance schedule below. This schedule is based on the Honda recommended
service intervals for the equipment when used as intended. When used at continuous high load or
high temperature operation, or in wet or dusty environments, the unit may require more frequent
service. Failure to conduct proper maintenance may result in non-warranty repairs.
SPU16
SPU16 DPU31
SPU16 SPU16 SPU16
DPU31 DPU31 DPU31 DPU31
Object Action
After
every
use
first
month
or 10
workin
g hours
first
month
or 20
working
hours
3
months
or 50
working
hours
6
months
or 100
working
hours
Yearly
or 200
working
hours
Engine oil
Check level ●
Change
●
●
●
Air filter
Check ●
Clean ● (1)
Spark plug
Clean/adjust
●
Replace ●
Spark arrester Clean
●
Valve
clearance Check
● (2)
Fuel tank &
filter Clean
● (2)
Fuel lines Check
Every 2 years (replace if necessary) (2)
Combustion
chamber Clean
Every 300 Hrs (2)
Hydraulic oil
Check level ●
Change
●
Couplings
Check ●
Clean ● ● (1)
Hydraulic
lines Check
Every 2 years (replace if necessary)
(1) Service more frequently when used in dusty areas
(2) These items should be serviced by an authorized Holmatro dealer.