2
1 | OVERVIEW
• Envelope Shape Control
• Stereo Reverb
• Resonant Low-Pass Filter and Pitch Modulation
• Mappable Expression Input
• Reverse Loop Playback and/or Eect direction
• MIDI IN/Out/Thru (Firmware updates via MIDI)
• Stereo Input / Output
FEATURES
• 4 Separate Eect Styles
• 44 preset Variations
• 16 User Presets - Save Settings & Loops
• Tap Tempo
• 60 second Phrase Looper
• Multiple Looper Playback Speeds
• Hold Sampler
Microcosm rearranges and reinterprets your sound in new and exciting ways using a variety of granular
sampling, delay, and looping techniques. Cascading micro loops can be locked into tight tap-tempo
synced rhythms, diused into glacial ambient textures, woven into hypnotic drones, and much more.
11 groundbreaking eects (with a total of 44 preset variations) allow you to slice, stretch, rearrange,
and manipulate your playing in musical ways. Tweak the sound further using Microcosm’s built-in Pitch
Modulation, lush Stereo Reverb (with 4 selectable modes), and Resonant Low-pass Filter.
The pedal features Tap Tempo for synchronizing these rhythms with other musicians, and a “Hold”
Sampler section that captures notes or chords to allow for unique harmony and drone eects.
When you’ve found a sound you like, the built-in stereo Phrase Looper can capture up to 60 seconds of
your performance and even allows for layering phrases from dierent eects. All loops, overdubs, and
settings can be saved and recalled later using the pedal’s 16 user presets.
2 | INPUTS & OUTPUTS
The pedal accepts a standard 9v, center-negative, 2.1mm DC barrel connector
power supply. For best results, use an isolated power supply.
9V POWER INPUT
9 volt
2.1 mm barrel connector, center negative
400 mA minimum
Mono/Stereo TRS Input, Output L, Output R, EXP IN, MIDI In, MIDI Out/Thru, 9vDC
CONNECTIONS
Using a switching power supply or daisy-chain from another pedal can add extra
unwanted noise. The power supply must be capable of providing a minimum of
400 mA to Microcosm.
To Next Page
Loading...
