10X1 MD80-S Manual 1.0 en HOLOPLOT Audio System
SOFTWARE SUITE
HOLOPLOT Plan makes the design, simulation, and set-
up of a HOLOPLOT Audio System simple and intuitive.
The 3D graphic interface allows users to design Matrix
Arrays of different congurations and create sound
elds based on 3D Audio-Beamforming and Wave Field
Synthesis technology. Venue models are easily imported
from standard 3D modeling software such as SketchUp.
HOLOPLOT Plan also simulates and visualizes direct
sound pressure levels, giving a realistic prediction of
the audio quality in the venue. For further analysis and
advanced simulations, projects can be exported to EASE.
HOLOPLOT Control makes managing and operating a
HOLOPLOT Audio System efcient and hassle-free. As
a rst-level gateway to the system, it provides critical
diagnostic information and allows users to easily locate
Matrix Arrays within the venue, control volume and
equalization, and monitor performance. By displaying
essential system data (such as component health or
network status), HOLOPLOT Control aids technical staff in
operating and maintaining the entire system.
CONTROLLER
The HOLOPLOT Controller manages a HOLOPLOT
Audio System through a standard IP network, providing
different functionalities: general system control,
collection of system health and performance data, as
well as sound eld control.
The HOLOPLOT Controller is based on a Dell PowerEdge
XR2 Industrial Rack Server and is a 19-inch 1U standard
rack-mountable device.
HOLOPLOT Create is a complete solution for production
of object-based audio content. It enables creators
to produce transformational audio experiences with
immersive sound objects integrated and designed for
HOLOPLOT Matrix Arrays. Audio object properties can
be controlled via standard DAW automation (plug-in in
AU and VST3 format), and by third-party devices via the
OSC (Open Sound Control) protocol.
To Next Page
Loading...
Need help?
General