-17-
HEAD
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
10.5 GPS Searching
Place the drone on a flat and dry surface where is unobstructed and lit area.
When the indicator lights change from yellow to green, it means that the
search for GPS signal is completed. This process may take about a minute.
ATTENTION:
·If the search for GPS signal fails, please repeat all the Compass
Calibration operations until the process is successful.
10.6 Calibrating the Gyro
Simultaneously push the left joystick and the right joystick to the bottom
right corner to calibrate the gyro.
When the indicator lights on the drone blink quickly and turn solid on,
indicating calibration is completed.
Tips:
To ensure a stable flight, we suggest that the pilot calibrates the
gyro every time after pairing the drone and after a crash.
To Next Page