Do you have a question about the Holy Stone HS720E and is the answer not in the manual?
GPS | Yes |
---|---|
Battery | 2800mAh |
Foldable | Yes |
Camera Resolution | 4K UHD |
Video Resolution | 4K at 30fps |
Max Wind Resistance | Level 5 |
Follow Me Mode | Yes |
Return to Home | Yes |
Controller Frequency | 2.4GHz |
Camera | Yes |
Control Range | 999 meters |
SD Card Support | Yes |
Charging Time | 5-7 hours |
Max Flight Time | 23 minutes |
Max Flight Distance | 999m / 3277ft |
Video Transmission | 5GHz WiFi |
Image Transmission Range | 500 meters |
FPV Range | 500 meters |
Ensure the drone is set up correctly, batteries are clean and charged, and propellers are undamaged and correctly installed.
Fly in open areas, maintain line of sight, fly below 390 feet, avoid obstacles, crowds, power lines, and adverse weather.
Do not follow moving vehicles, turn off motor only in emergency, avoid alcohol/fatigue, mind noise volume, stay away from propellers/motors, avoid no-fly zones.
Ensure correct battery orientation, avoid short circuits, do not mix batteries, dispose properly, keep away from heat, remove if not in use.
Details the functions of the transmitter controls, including joysticks, power switch, and camera angle adjustment.
Describes the various indicators and information displayed on the drone transmitter's LCD screen.
Explains the visual cues for low battery warnings on the drone and transmitter's LCD.
Details the two flight modes (MODE 1 and MODE 2) and how to switch between them.
Instructions on how to install and remove the drone's battery correctly and safely.
Guides on how to install and remove the drone propellers, ensuring correct placement for flight.
Instructions for inserting a TF card for storing photos and videos, including capacity limits.
Details on how to open the drone's antenna, likely for signal reception.
Step-by-step guide on how to attach and adjust the phone holder on the transmitter.
Instructions for installing batteries into the drone transmitter, emphasizing correct polarity and battery types.
Detailed instructions on how to charge the drone battery using the provided accessories and indicator light meanings.
Instructions on how to download the Ophelia GO app for drone control via QR codes for iOS and Android.
Steps to connect your smartphone to the drone's Wi-Fi network to enable app control.
Procedure for pairing the transmitter with the drone, including button presses and indicator signals.
Explains the initialization detection process and indicator light behavior for first-time use and subsequent uses.
Step-by-step guide to calibrate the drone's compass for accurate navigation and stable flight.
Instructions for unlocking and locking the drone's motors before and after flight.
How to use the one-key takeoff and landing feature for automatic flight initiation and termination.
Instructions on how to adjust the drone's camera angle up or down using the transmitter's control wheel.
Details the Smart RTH and Failsafe RTH procedures, explaining how the drone returns to its home point.
Explains the optical flow positioning system for indoor navigation when GPS is weak or unavailable.
Overview of the drone control app's main interface, detailing various function icons and their purposes.
Instructions on enabling and using the 'Follow Me' mode, where the drone tracks the user's smartphone.
Guide to using the 'Point of Interest' feature for the drone to circle a specific point autonomously.
Explanation of Headless Mode, ensuring the drone moves relative to the pilot's orientation, not its own.
Instructions on using the TapFly feature to set flight paths or points on the map for the drone to follow.
How to take photos and record videos using the app, including saving locations and accessing the gallery.
Technical details of the HS720E drone, including weight, flight time, and dimensions.
Specifications for the drone battery, such as capacity, voltage, type, and charging time.
Technical details of the transmitter, including frequency, power, distance, and battery type.
Technical details of the drone's camera, including resolution, lens, and transmission distance.
Specifications for the USB charging cable, including voltage and rated power.
Information regarding FCC compliance, including rules and conditions for operation.
Details on RF exposure limits and compliance for the drone and transmitter.
Information regarding Industry Canada license-exempt RSS standards compliance.
Instructions on how to properly recycle the product and its components.