<
FLIGHT>
<
FLIGHT>
A
All of the operations shown in this manual are
demonstrated using MODE 2.
1.Pair the Drone
<D
Connect the battery port
access to the fuselage power
port.
® Turn on the transmitter. '@ Push the throttle joystick up
,then down to pair the
drone
: with the transmitter The LED
indicamf
lights on [he
drone
will
turn
solid
jf
the drone is paired
successfully.
-11-
2. Calibrate the Gyro
As shown in the diagram above, push the left and right joystick
simultaneously to the lower left corner to calIbrate the gyro. The LED
lights on me drone will blink quickly and rum solid. When you hear
2 beeps from the transmitter that indicates the calibration is
completed.
Tips: To ensure a stable flight, we
suggest
that the pilot
calibrates the gyro every time after pairing the drone and after
a crash.
3. One Key Startj Landing
d
1
Aher pairing( calibration, press the One Key Start button, rne
propellerswill
start spinning, indicating this
drone
is ready
co
fly, and
you can conrrol this drone
by
using the
joysrkks.
Press
[he
One
Key
Landing button again, the drone will land by itself.
-12-
To Next Page
Loading...
