Holztech SD320
WWW.HOLZTECH.COM
Attention! - The knives may have maximum 1.0 mm height above the working table.
- The knives must be changed one by one.
- Do not use knives shorter than30 mm.
- Use only one-side sharpened knives otherwise rebound may occur.
- Carefully fix the connecting bolts.
10.0 SERVICE
Attention! Prior to any servicing work disconneet machine from mains.
Check for vibrations after assembly of planing knives as per art. 9.2 - or consult
supplier.
10.1 Lubrication
Apply regularly oil to the tables guides.
Apply oil sliding to the pillar guides of thicknessing table.
10.2 Clamping
To Next Page
Loading...