button, 2-cup coffee button and manual coffee button flash, the machine begins
preheating, after all indicators are solidly on, it means that preheating is completed, press
Manual coffee button, the machine pumps water, when there is water flowing out, press
this coffee button again to stop pumping water immediately. The purpose of this step is to
pump the water of water tank into boiler.
6. When coffee button indicator is illuminated, it indicates the preheating is finished.
MAKE ESPRESSO
1. Remove funnel by turning it clockwise. Add ground coffee into steel mesh with measuring
spoon, a spoon of ground coffee powder can make about a cup of top-grade coffee, then
press ground coffee powder tightly with the tamper.
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in
the appliance, then insert the funnel into the appliance from the “INSERT” position, and
fix them into coffee maker firmly by turning it anticlockwise until it is at the “LOCK”
position.
3. Place a cup on removable cup shelf.
4. After preheating is completed, press 1-cup or 2-cup coffee button, the product will start
brewing, working time for 1-cup coffee is 15 seconds and 25 seconds for 2-cup coffee . if
you want to get the amount of coffee you like, press manual coffee button once, when your
desired quantity of coffee is reached, press this button again to stop, for manual coffee button,
working time is Max 90s, unit will automatically stop working if no any operation within 90s.
5. At the time corresponding coffee button indicator is to be illuminated, if it is extinguished,
wait for a moment, once it is illuminated again, press corresponding coffee button, wait for a
moment, there will be coffee flowing out.
4. Press Coffee button when desired coffee is obtained or the colour of coffee changes
weak obviously, coffee maker stops working, if coffee button indicator is extinguished,
wait for a moment, coffee button indicator will be illuminated again, you can continue to
make coffee.
5. Press and hold 1-cup button for 3 seconds, 1-cup button flashes, entering setting mode,
press 1-cup button again to start dispensing coffee, when the specified time is reached,
press 1 cup button to complete setting which can be memorized by the unit. Working
duration for 1-cup coffee can be set up to 45s, if working duration for 1-cup coffee is set,
working duration for 2-cup coffee will be automatically updated to 2 times of that for 1-cup
coffee ; Working duration for 2-cup coffee can be set up to 90s, if working duration for
2cup coffee is set, working duration for 1-cup coffee will be automatically updated to half
of that for 2-cup coffee
WARNING: Do not leave the coffee maker unattended during making coffee, as you need
operate manually sometimes!
6. After finish making coffee, take metal funnel out by turning it clockwise, then pour coffee
residue out with steel mesh pressed by press bar.
To Next Page
Loading...
Need help?
General