operation, the steam indicator flashes quickly for alarming, in this case, press coffee button to
cool down, and the machine can resume standby after cooling down to normal temperature.
Note: If you want to make coffee immediately after making steam, coffee indicator will flash
for alarming upon pressing coffee button, at this time you should turn steam control knob to
the ON position to pump hot water in order to let unit cool down.
AUTOMATIC POWER OFF FUNCTION
If there is no any operation within 25 minutes, the unit will power off automatically.
CLEANING AND MAINTENANCE:
1.Turn off coffee maker and let the coffee maker cool down completely before cleaning.
2. Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip
tray and removable cup shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for
cleaning.
3. Detach metal funnel by turning it clockwise, get rid of coffee residue inside, then clean it
with cleanser, but at last rinse with clear water.
4. Clean all the attachments in the water and dry them thoroughly.
5. After the machine works for 500 cycles (including coffee, steam and other functions), all
the indicators quickly flash 5 times at the same time once preheating is completed, reminding
you of descaling, if you do not descale, this will happen every time when you use the machine;
in standby state, at the same time press and hold Manual coffee button and 2-cup coffee
button for 3s, and the two indicators quickly flash 3 times, reminding you of cancelling
descaling, and the number of working cycles returns to zero.
CLEANING MINERAL DEPOSITS
1. To make sure your coffee maker operates efficiently, internal piping is clean and the flavor of
coffee is optimal, you should clean away the mineral deposits left every 2-3 months.
2.Fill water tank with water and descaler to the MAX level ( the proportion of water and descaler
is 4:1, the detail refers to the instruction of descaler. Please use “household descaler”, you can
use the citric acid (obtainable from chemist’s or drug stores) instead of the descaler (the one
hundred parts of water and three parts of citric acid).
3.According to the preheating program, put the metal funnel (without coffee powder in it) and
jug in place. Brew water as per “ PREHEATING”.
4. Press Power button, power indicator will be illuminated, press Coffee button, make sure
steam control knob is in the Off position, when there is water flowing out, press Coffee button to
To Next Page
Loading...
Need help?
General