BEFORE THE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with warm
water as follows:
1. Open water tank cover, fill water into water tank, water level should not exceed the “MAX”
mark
in water tank. Then replace the water tank cover.
Note: the appliance is supplied with a detachable water tank for easy cleaning, you can fill
water tank with water first, and then attach water tank into the appliance.
2. Set steel mesh into metal funnel (no coffee in steel mesh), make sure the tube on the
funnel aligns with groove in the appliance, then insert the funnel into the appliance from
the “INSERT” position, and fix them into coffee maker firmly by turning it anticlockwise
until it is at the “LOCK” position.
3. Place an jug on removable cup shelf. Make sure steam control knob is on the OFF
position.
4. Connect into power source, press power button, power indicator is illuminated white, The
indicators of 1- cup coffee button, 2-cup coffee button,manual coffee button and steam
button flash, the machine begins preheating, after all indicators are solidly on, the
preheating is completed
Note: if preheating is not completed yet, press 1-cup coffee button, 2-cup coffee button or
manual coffee button, the pump does not work;if you want to make steam,press the steam
button.
5. Press Manual coffee button, the unit will pump water for about 30s, pour out water in the
cup then clean them thoroughly, now the appliance is ready for making coffee.
Note: There may be noise when pumping water for the first time, it is normal that the
appliance is releasing the air inside. After about 20s, the noise will disappear.
Note:Before the first use,because there is no water in the boiler,the button indicator will flash
to alarm quickly.Press the button of the free cup until the pump stops working and the
product stops to alarm,and the coffee brewing operation can be started.
Noto：The number displayed on the action pannel indicates that the time it takers to make
coffee is not an alarm clock.
PREHEATING
To make a cup of good hot Espresso coffee, we recommend you should preheat the appliance
before making coffee, including metal funnel, steel mesh and cup, so that the coffee flavour can
not be influenced by cold parts.
1. Remove detachable water tank and open water tank cover to fill it with desired water, the
water level should not exceed the “MAX” mark in the tank. Then replace water tank
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in
the appliance, then insert the funnel into the appliance from the “INSERT” position, and fix
them into coffee maker firmly by turning it anticlockwise until it is at the “LOCK” position.
3. Place an espresso cup on removable cup shelf.
4. Then connect appliance to power supply. Make sure steam control knob is on the OFF
position.
5. Press power button, power indicator is illuminated white, The indicators of 1- cup coffee
To Next Page
Loading...