stop pumping, and wait for a moment, the coffee maker begins to preheat
5. When Coffee button indicator is illuminated, it shows preheating is finished. Press Coffee
button and make two cups of coffee (about 2Oz). press Coffee button to stop pumping.
6. Press Steam button, Coffee button indicator will be extinguished, wait until Steam button
indicator is illuminated. Make steam for 2min by turning steam control knob, then turn steam
control knob to the OFF position to stop making steam. Press Power button to turn off the unit
immediately, make the descaler deposit inside the unit at least 15 minutes.
7. Press Power button to restart unit, wait until Coffee button indicator will be illuminated, then
press Coffee button to brew until no descaler is left.
9. Brew with tap water in the MAX level, repeat steps 4-6 for 3 times, then brew until no water is
left in water tank.
TROUBLE SHOOTING
S
mptom Cause Corrections
The metal
parts in the tank
have rust.
Descaler is not recommended
type. It may corrode the metal
parts in the tank.
Use the descaler recommended by
manufacturer.
Water leaks
from the bottom
of coffee maker.
There is much water in the drip
tray.
Please clean the drip tray.
The coffee maker is
malfunction.
Please contact with the authorized service
facility for repairing.
Water leaks out
of outer side of
filter.
There is some coffee powder on
filter edge.
Get rid of them.
Acid (vinegar)
taste exists in
Espresso
coffee.
No clean correctly after
cleaning mineral deposits.
Clean coffee maker per the content in
“before the first use” for several times.
Coffee powder is stored in a
hot, wet place for a long time.
The coffee powder turns bad.
Please use fresh coffee powder, or store
unused coffee powder in a cool, dry place.
After opening a package of coffee powder,
reseal it tightly and store it in a refrigerator
to maintain its freshness.
Coffee maker
cannot work
any more.
Power outlet is not plugged
well.
Plug the power cord into a wall outlet
correctly, if the appliance still does not
work, please contact with the authorized
service facility for repairing.
Steam cannot
froth.
The steam indicator is not
illuminated.
Only after the steam indicator is
illuminated, the steam can be used to
froth.
The container is too big or the
shape not fits.
Use high and narrow container.
You have used skimmed milk Use whole milk or half-skimmed milk
Do not take apart the appliance by yourself if the cause of failure is not found, you
had better contact the qualified servicing center.
To Next Page
Loading...
Need help?
General