To Next PageTo Next PageWhat to do if the Home Decorators Collection Fan remote control is not working?
If the remote control for your Home Decorators Collection Fan isn't working, first, make sure that the fan is not connected to any wall-mounted variable speed controls. Also, verify that the frequency switches are set correctly.
What to do if my Home Decorators Collection Brette AM382A-EB will not start?
If your Home Decorators Collection Fan is not starting, begin by checking the main and branch circuit fuses or breakers. Next, inspect the line wire connections to the fan and the switch wire connections in the switch housing. Finally, ensure that the frequency switches on both the remote control and receiver are set to the same frequency.
How to fix a noisy Home Decorators Collection Brette AM382A-EB Fan?
If your Home Decorators Collection Fan sounds noisy, there are several things you can check: * Ensure all motor housing screws are snug. * Verify that the screws attaching the fan blade to the motor hub are tight. * Confirm that wire nut connections are not rattling against each other or the interior wall of the switch housing. * Allow a 24-hour "breaking-in" period for the fan, as most noises disappear during this time. * Make sure there is a short distance from the ceiling to the canopy, ensuring it does not touch the ceiling. * Ensure your ceiling box is secure and rubber isolator pads are used between the mounting bracket and outlet box.
Procedure for securely attaching the fan's mounting bracket.
Steps for safely hanging the fan assembly onto the bracket.
Instructions for setting up the remote control receiver and transmitter.
Guide to wiring the fan to the household electrical supply.
General| Brand | Home Decorators Collection |
|---|---|
| Model | Brette AM382A-EB |
| Category | Fan |
| Language | English |
