12
FAQ
Fault Possible cause Remedy
No transmission
Connected to power? Check mains connecon
Display unit incorrectly set up? Check sengs
Bad recepon
Interference on transmission
channel?
Check connecon cables or DVR box
Distorted colours
or glare on the
picture
A light source is causing this
Adjust the camera cap, or reposion
the camera
Other Useful Informaon
Specicaons
Camera Sensor: 700 TV Line
Night Vision: Up to 20m
Night Vision LED’s: 36 Infrared LED’s
Light Sensivity (Lux): 0.01 (0 Lux when IR on)
Video Output HD Video and 1 x BNC
Dust/Waterproof (IP): IP65
Power Supply: 12V/1A
Power Consumpon: Max 2.5W
Viewing angle: 3.6 mm with 70-80 degree