10
Installation
Take out accessories from bucket
The accessories are stored in the bucket during transportation. Before use, remove the accessories from
the bucket.
- Remove the bucket from the unit.
- Rotate the handle to the position like below gure and remove the handle.
- Open the bucket cover and take out the power plug and other accessories.
- Replace the bucket cover and handle, then put back the bucket into the unit correctly.
Install the casters
Tilt the unit less than 45° and forcibly insert the casters. Make sure the plate of the casters is ush against
the bottom of the unit.
If the casters have been installed to the appliance, skip this step.
To Next Page
Loading...
