Home HME020379N - Remote Control Basic and Timer Functions; Basic Functions Usage; Setting Temperature; Timer Function Setup

18 19
REMOTE CONTROL
SETTING THE TIMER FUNCTION
REMOTE CONTROL
HOW TO USE THE BASIC FUNCTIONS
COOL OPERATION
1. Press the MODE button. Select COOL mode.
2. Set your desired temperature using the TEMP or TEMP button.
3. Press the FAN button to select the fan speed: AUTO, LOW, or HIGH.
4. Press the ON/OFF button to start the unit.
SETTING TEMPERATURE
The operating temperature range for units is 17-30C (62F-86F). You can increase or decrease the set
temperature in 1C (1F) increments.
AUTO OPERATION
In AUTO mode, the unit will automatically select the COOL, FAN, or DRY mode based on the set temperature.
1. Press the MODE button to select AUTO mode.
2. Set your desired temperature using the Temp or Temp button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED cannot be adjusted in AUTO mode.
DRY OPERATION (DEHUMIDIFYING)
1. Press the MODE button to select DRY mode.
2. Set your desired temperature using the Temp or Temp button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED cannot be adjusted in DRY mode.
FAN operation
1. Press the MODE button to select FAN mode.
2. Press FAN button to select the fan speed: AUTO, LOW, or HIGH.
3. Press the ON/OFF button to start the unit.
NOTE: Temperature cannot be adjusted in FAN mode. As a result, there will be no temperature information on
your remote control.
Your air conditioning unit has two timer-related functions:
TIMER ON- sets the amount of time after which the unit will automatically turn on.
TIMER OFF- sets the amount of time after which the unit will automatically turn off.
TIMER ON function
The TIMER ON function allows you to set a period of time after which the unit will automatically turn on.
1. Press the TIMER ON 
will appear on the display.
NOTE: This number indicates the time countdown that you want the unit to turn on. For example, if you
set TIMER ON
2. Press the TIMER ON button repeatedly to set the time when you want the unit to turn on.
3. Wait 2 seconds. The TIMER ON function will be activated. The time display on your remote control will
then change to the temperature display.
Example: Setting your air
conditioner to turn on after
2.5 hours.
TIMER OFF function
The TIMER OFF function allows you to set a period of time after which the unit will automatically turn off.
1. Press the TIMER OFF
hours) will appear on the display.
NOTE: This number indicates the time countdown that you want the unit to turn off. For example, if you
set TIMER OFF
2. Press the TIMER OFF button repeatedly to set the time when you want the unit to turn off.
3. Wait 2 seconds. The TIMER OFF function will be activated. The time display on your remote control
will then change to the temperature display.
NOTE:
When setting the TIMER ON or TIMER OFF functions for up to 10 hours, the time
will increase in 30-minute increments with each press. Between 10 hours and
24 hours, it will increase in 1-hour increments. The timer will revert to zero after

Example: Setting your air
conditioner to turn off after
5 hours.
Continue to press
TIMER ON or
TIMER OFF until
desired time is
reached.