12
PLUG REPLACEMENT
If you need to replace the fitted plug, then follow the instructions below.
WARNING!
WARNING!
The wires in the mains lead are coloured in accordance
with the following code:
Blue – Neutral
Brown – Live
As the colour of the wire in the mains lead of this apparatus may not
correspond with the coloured marking identifying the terminals in your
plug, proceed as follows:
Never connect live or neutral wires to the earth terminal
of the plug.
Only fit an approved BS 1363 or BS 1363/A plug and correctly rated
BS 1362 3 Amp fuse. If in doubt, consult a qualified electrician.
NOTE: If a moulded plug is fitted and has to be removed, take great care
in disposing of the plug and severed cable; it must be destroyed to
prevent it being accidentally plugged into a power socket.
Connect Blue
to N (Neutral)
Fuse
Approved to
BS 1362
Brown L (Live)
Cable grip
Outer sleeve
firmly clamped
The blue wire must be connected to the terminal marked N or
coloured black.
The brown wire must be connected to the terminal marked L or
coloured red.
To Next Page
Loading...
