HoMedics BPA-110 User Manual (English)

Other manuals for HoMedics BPA-110

User Manual34 pages

Instruction Manual30 pages

Questions and Answers:

A
Ariel Manning DVMAug 15, 2025
What to do if EE error appears on HoMedics Blood Pressure Monitor?
- C
  cameron10Aug 15, 2025
  If you see the EE error symbol on your HoMedics Blood Pressure Monitor, or if the blood pressure reading seems too low or high, it could be due to incorrect cuff placement. Make sure the cuff is wrapped properly and positioned correctly. Also, avoid talking or moving during the measurement; try again while keeping your arm steady. Shaking your arm while the cuff is on may also cause this error.
P
Paula McguireAug 18, 2025
How to fix HoMedics BPA-110 Blood Pressure Monitor that won't turn on?
- J
  Jeffery GregoryAug 18, 2025
  If your HoMedics Blood Pressure Monitor doesn't turn on when you press the START/STOP button, the batteries may be dead. Replace them with four new AA alkaline batteries. Also, ensure the batteries are inserted correctly, paying attention to the polarities. If they are positioned incorrectly, re-insert them in the correct positions.
N
nchavezAug 21, 2025
What does E1 error mean on HoMedics Blood Pressure Monitor?
- D
  Dr. John Villa Jr.Aug 21, 2025
  If the E1 error symbol appears on your HoMedics Blood Pressure Monitor, it indicates an air circuit abnormality. This could be due to the cuff tube not being properly plugged into the monitor. Check the cuff connection and then measure again.
M
Margaret JonesAug 25, 2025
What does E2 error mean on HoMedics BPA-110?
- E
  erica16Aug 25, 2025
  If the E2 error symbol is displayed on your HoMedics Blood Pressure Monitor, it means the inflation pressure exceeded 300 mmHg. To resolve this, switch the unit off and then measure again.
L
Lisa YatesAug 27, 2025
What does E3 error mean on HoMedics BPA-110?
- K
  Kelly RoachAug 27, 2025
  If the E3 error symbol appears on the display of your HoMedics Blood Pressure Monitor, it indicates an error in determining measurement data. Try taking the measurement again.
M
Martha Oconnor DDSAug 30, 2025
What to do if HoMedics BPA-110 shows EE error?
- M
  mauricemartinezAug 30, 2025
  If your HoMedics Blood Pressure Monitor displays the EE error, or the blood pressure reading seems too low or high, it could be due to incorrect cuff placement. Make sure the cuff is wrapped properly for correct positioning. Also, avoid talking or moving during the measurement; keep your arm steady and measure again. Shaking your arm with the cuff on can also cause this error.
C
Christopher RobertsSep 2, 2025
What to do if HoMedics Blood Pressure Monitor displays E2 error?
- A
  Amanda CarterSep 2, 2025
  If your HoMedics Blood Pressure Monitor shows the E2 error symbol, it means the inflation pressure exceeded 300 mmHg. To resolve this, switch the unit off and then measure again.
R
Robert FritzSep 5, 2025
Why does my HoMedics BPA-110 Blood Pressure Monitor show E3 error?
- S
  Sarah ManningSep 5, 2025
  If your HoMedics Blood Pressure Monitor displays the E3 error symbol, it indicates an error determining measurement data. To resolve this, measure again.
O
ohouseSep 8, 2025
What to do if HoMedics BPA-110 Blood Pressure Monitor displays E1 error?
- C
  Connie LeeSep 8, 2025
  If the E1 error symbol appears on your HoMedics Blood Pressure Monitor, it indicates an air circuit abnormality. Check the cuff connection to ensure the cuff tube is correctly plugged into the monitor, then measure again.
S
Sandra HolmesSep 12, 2025
What does EP error mean on HoMedics BPA-110?
- M
  Mary OrtizSep 12, 2025
  If the EP error symbol is displayed on your HoMedics Blood Pressure Monitor, it indicates a system error. Please measure again.

HoMedics BPA-110 Specifications

General

Type	Upper Arm
Display	LCD
Measurement Method	Oscillometric
Measurement Range (Pressure)	0-300 mmHg
Memory	60 Readings
User Profiles	2
Irregular Heartbeat Detection	Yes
Automatic Shut-off	Yes
Measurement Range (Pulse)	40-199 bpm
Power Source	4 AA Batteries
Cuff Size	22-32 cm (8.7-12.6 inches)