What to do if the replace filter light remains lit on my HoMedics TotalClean AT-PET02 Air Cleaner after filter replacement?
If the replace filter light stays on after replacing the filter on your HoMedics Air Cleaner, the replace filter indicator needs to be reset. Press and hold the replace filter button until you hear a beep.
What to do if my HoMedics TotalClean AT-PET02 unit will not operate?
If your HoMedics Air Cleaner isn't working, there are several possible causes. First, ensure the unit is properly plugged into a working outlet. If it is plugged in, make sure you have pressed the POWER button to turn it on. Check the outlet to ensure it has power, testing circuits, fuses, or trying a different outlet. Lastly, verify that the HEPA filters are correctly installed; if not, reinstall them properly.
Why is my HoMedics Air Cleaner producing odors?
If your HoMedics Air Cleaner seems to be producing odors, the filters likely need replacing. Replace the filters as needed to resolve this issue.
Why is airflow reduced in my HoMedics TotalClean AT-PET02 Air Cleaner?
Reduced airflow or poor filtering in your HoMedics Air Cleaner can be due to several reasons. First, make sure you've removed the plastic wrapping from the filters. Check the back grille cover to ensure it's not blocked, and also inspect the pre-filter for clogs, cleaning it if necessary.
How to fix excessive noise from my HoMedics TotalClean AT-PET02 Air Cleaner?
Excessive noise from your HoMedics Air Cleaner can be addressed by checking a few things. First, ensure the unit is placed on a flat, even surface. If you are using PetPlus odor filters, remove them from their plastic bags. Also, make sure all filters are properly secured. Finally, consider that dirty filters restricting airflow may also cause noise, so replace the filters if needed.
Details the warranty coverage and terms for the HoMedics air purifier.
Essential safety guidelines for operating electrical appliances, especially around children.
Specific warnings to prevent electrical shock, burns, fire, or injury during use.
Details the components and functions of the air purifier's control panel.
Highlights key capabilities like True HEPA filtration, speeds, timer, and room size suitability.
Step-by-step guide to unpack and install filters for the air purifier.
Guides on using power, fan speed, timer, and oscillation features.
Explains when and how to replace HEPA and Odor filters.
Step-by-step instructions for cleaning the air purifier's pre-filter.
Procedures for cleaning the air purifier unit, grille cover, and filters.
Addresses common issues with the air purifier and provides solutions for troubleshooting.
Outlines the full terms, conditions, exclusions, and limitations of the warranty.
General| Product Type | Air Purifier |
|---|---|
| Model Number | AT-PET02 |
| HEPA Filter | Yes |
| Pre-Filter | Yes |
| Number of Speeds | 3 |
| Power Source | AC Power |
| Odor Reduction | Yes |
| UV-C Technology | Yes |
| Filter Replacement Indicator | Yes |
| Filter Type | HEPA |
To Next Page