EasyManua.ls Logo

Homelite UT10510A User Manual

Homelite UT10510A
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR'S MANUAL
14 in. (356 mm) 33cc Chain Saw
Model No. UT10510, UT10510A, UT10901A, UT10901B
Your new chain saw has been engineered and manufactured to Homelite’s high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operators manual before
using this product.
Thank you for buying a Homelite chain saw.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Question and Answer IconNeed help?

Do you have a question about the Homelite UT10510A and is the answer not in the manual?

Homelite UT10510A Specifications

General IconGeneral
Bar Length10 in
Power OutputUnknown
Weight9.2 lbs
Engine Displacement26 cc
Fuel Capacity9.8 oz
Oil Capacity6.8 oz
Fuel Tank Capacity9.8 oz
Oil Tank Capacity6.8 oz
Engine Type2-stroke

Summary

GENERAL SAFETY RULES

SPECIFIC SAFETY RULES

KICKBACK

Explanation of kickback and precautions to avoid serious injury.

OPERATION

KICKBACK PRECAUTIONS

Precautions against rotational kickback and the kickback danger zone.

STARTING THE ENGINE

Step-by-step instructions for starting the chain saw engine.

PROPER GRIP ON HANDLES

Instructions for holding the chain saw firmly with both hands for safe operation.

BASIC OPERATING/CUTTING PROCEDURES

Techniques for practicing small log cuts and general cutting procedures.

PROPER PROCEDURE FOR TREE FELLING

Step-by-step guide for felling trees, including escape routes and notch cutting.

BUCKING LOGS UNDER STRESS

Techniques for cutting logs under stress to avoid pinching or hanging.

LIMBING AND PRUNING

Safe techniques for limbing and pruning branches, including cutting order and height.

FUEL AND REFUELING HANDLING THE FUEL SAFELY

Safe practices for handling and refueling the chain saw, including fuel mix ratios.

PROPER CUTTING STANCE

Guidance on maintaining balance and stance for safe cutting operations.

FELLING TREES HAZARDOUS CONDITIONS

Warnings and conditions to consider when felling trees safely.

BUCKING

Term for cutting a fallen tree to desired log length and safe bucking practices.

CUTTING SPRINGPOLES

Warning and identification of springpoles, which can cause loss of control.

MIXING THE FUEL

Instructions for mixing gasoline and 2-cycle oil for the engine.

MAINTENANCE

ASSEMBLING THE BAR AND CHAIN

Step-by-step guide for assembling the guide bar and chain onto the saw.

ADJUSTING THE CHAIN TENSION

Procedure for adjusting and checking the chain tension for proper operation.

SHARPENING THE CUTTERS

Step-by-step guide on how to sharpen the saw chain cutters.

TROUBLESHOOTING

Related product manuals