Page 6
SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME EXPLANATION
Indicates danger, warning or caution. It means attention!!!
Your safety is involved.
Your manual contains special messages to bring
attention to potential safety concerns, machine damage
as well as helpful operating and servicing information.
Please read all the information carefully to avoid injury
and machine damage.
Wear eye, hearing, and head protection when operating
this equipment.
The SAFE-T-TIP nose guard on the guide bar helps
prevent kickback.
No smoking, sparks, or open flame.
Diagonal line across a symbol means this is prohibited
or should be avoided.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
Engines produce carbon monoxide which is an odorless,
deadly poison. Do not operate in an enclosed area.
Danger – beware of kickback.
Avoid bar nose contact.
Wear non-slip gloves.
Safety Alert Symbol
Read Your Operator’s Manual
Eye, Hearing, and Head Protection
SAFE-T-TIP Nose Guard
No Smoking
Operate with Two Hands
One Handed
Prohibited Symbol
Gloves
Bar Nose Contact
Kickback
Carbon Monoxide
To Next Page
Loading...
Need help?
General