To Next Page
J
John CooleyAug 17, 2025
How to fix Homelite UT32600 Trimmer string that will not advance?
- MMegan FreemanAug 17, 2025
Several factors can cause this. It could be that the string is welded to itself, there isn't enough string on the spool, the string is worn too short, the string is tangled, or the engine speed is too slow. Try lubricating the string with silicone spray. If that doesn't work, install more string. You can also try pulling the strings while alternately pressing down on and releasing the spool retainer. If the string is tangled, remove it from the spool and rewind it. Make sure to advance the string at full throttle.
General
