To Next Page
P
Paula DavisJul 27, 2025
What to do if Homematic IP HMIP-PS Switch is defective?
- GGloria Wood MDJul 27, 2025
If your Homematic IP Switch is defective, please check your app for an error message or contact your retailer for assistance.
What to do if Homematic IP HMIP-PS Switch is defective?
If your Homematic IP Switch is defective, please check your app for an error message or contact your retailer for assistance.
What to do if Homematic IP HMIP-PS Switch duty cycle exceeded or transmission failed?
If the duty cycle is exceeded or transmission failed on your Homematic IP Switch, please try again.
General| Compatibility | Homematic IP |
|---|---|
| Max. Power Consumption | 0.5 W |
| Relay Output | 1 |
| IP Protection | IP20 |
| Max. Load | 3680 W |
| Max. Current | 16 A |
| Certification | CE |
| Frequency | 868.3 MHz |
| Power Supply | 230 V AC |
| Switching Capacity | 16 A |
Details the system button's functions for teaching-in and controlling loads.
Guides the user through the initial setup and device integration process.
Addresses problems where commands are not confirmed by the device.
Explains the legally regulated limit for transmission time in the 868 MHz range.
Details device LED flashing patterns and their corresponding meanings.
