26
Hazard information
In the event of an error, please have the device
checked by an expert.
Do not use the device if there are signs of dam-
age to the housing, control elements or connect-
ing sockets, for example, or if it demonstrates a
malfunction. If you have any doubts, have the
device checked by an expert.
For safety and licensing reasons (CE), unauthor-
ized change and/or modification of the device is
not permitted.
The device may only be operated indoors and
must be protected from the eects of moisture,
vibrations, solar or other methods of heat radia-
tion, cold and mechanical loads.
The device is not a toy; do not allow children to
play with it. Do not leave packaging material lying
around, plastic films/bags, pieces of polystyrene
etc., can be dangerous in the hands of a child.
Please take the technical data (in particular the
maximum permissible switching capacity of the
relay and the type of load to be connected) into
account before connecting a load! All load data
relates to ohmic loads! Do not exceed the capac
To Next Page
Loading...
Need help?
General
