Need help?Do you have a question about the HONDA marine BF40D and is the answer not in the manual?
General| Max Output | 40 HP |
|---|---|
| Full Throttle RPM Range | 5, 000 - 6, 000 RPM |
| Cooling System | Water Cooled |
| Fuel Induction System | EFI |
| Starting System | Electric |
| Lubrication | Wet Sump |
| Oil Capacity | 1.1 L |
| Trim Range | -4° to +16° |
| Gear Ratio | 2.08:1 |
| Gear Shift | F-N-R |
| Steering | Remote |
| Displacement | 808 cc |
| Rated Power | 40 hp at 5500 rpm |
| Fuel Delivery | Electronic Fuel Injection |
| Recommended Fuel | Unleaded Gasoline (86 Octane) |
| Recommended Engine Oil | SAE 10W-30 |
| Exhaust | Through Prop |
| Propeller | 3-Blade |
| Alternator | 12V |
| Shaft Length | 20 inches (L), 25 inches (XL) |
| Trim Method | Power Trim & Tilt |
| Engine Type | 4-Stroke SOHC 3 Cylinder |
Provides essential safety information and explains hazard warning symbols like DANGER, WARNING, and CAUTION.
Details critical safety precautions for operating the BF40D/BF50D outboard motors and preventing injuries.
Details specific controls like ignition switch, emergency stop switch, throttle grip, and gearshift lever.
Outlines essential precautions for safely operating the outboard motor to ensure optimal performance and safety.
Provides step-by-step instructions for starting the outboard motor, covering different control types.
Provides a detailed schedule for regular service intervals and recommended maintenance tasks for the outboard motor.
Lists possible causes and corrections for an engine that fails to start or has starting issues.
To Next Page
