Need help?Do you have a question about the HONDA marine BF200A and is the answer not in the manual?
General| Max Output | 200 HP |
|---|---|
| Cooling System | Water Cooled |
| Starting System | Electric |
| SOHC | Yes |
| Full Throttle RPM Range | 5000-6000 RPM |
| Ignition System | MicroComputer Programmed |
| Lubrication System | Wet Sump |
| Trim Range | -4° to +16° |
| Tilt Range | 72° |
| Gear Ratio | 2.00:1 |
| Steering | Remote |
| Engine Type | 4-Stroke |
| Fuel System | Electronic Fuel Injection (EFI) |
| Shaft Length | 20 in / 25 in / 30 in |
| Bore & Stroke | 89 mm x 96 mm |
| Rated Power | 200 HP |
| Valve Train | SOHC |
| Fuel Delivery | Programmed Fuel Injection |
| Propeller | Optional |
| Bore x Stroke | 89 mm x 96 mm |
| Fuel Induction System | Multi-Port Electronic Fuel Injection |
| Recommended Fuel | Unleaded Gasoline (minimum pump octane 86) |
| Exhaust | Through Propeller |
Guidance on choosing the correct outboard motor for the boat.
Principles for secure and balanced outboard motor installation.
Steps to adjust boat transom height if ideal installation height is not met.
To Next Page
