What to do if oil pressure warning system comes on in HONDA marine BF50D Outboard Motor?
If the oil pressure warning system comes on, it may be due to a shortage of engine oil. Add engine oil to the specified level. It could also be caused by using the improper engine oil, so change the engine oil.
What to do if overheat warning system comes on in HONDA marine Outboard Motor?
If the overheat warning system activates, it could be due to a clogged cooling water intake port. Try cleaning the cooling water intake port. Another possible cause is spark plugs with an improper heat range, in which case you should replace the spark plugs.
Why ACG warning system comes on in HONDA marine Outboard Motor?
The ACG warning system might activate because the battery voltage is too high or too low. In this case, check the battery.
General| Brand | HONDA marine |
|---|---|
| Model | BF50D |
| Category | Outboard Motor |
| Language | English |
Provides safety precautions for users and others regarding operation and maintenance.
Outlines the user's duties for safe operation and manual understanding.
Details hazards associated with gasoline, flammability, and storage.
Explains the dangers of exhaust fumes and the need for ventilation.
Explains the purpose and locations of various safety labels on the motor.
Identifies components specific to the tiller handle type.
Identifies components specific to remote control types.
Details components of side-mount, panel-mount, and top-mount remote control boxes.
Details the positions and function of the shift lever for forward, neutral, and reverse.
Explains the purpose and attachment of the emergency stop switch lanyard and clip.
Explains the operation of the remote control lever for gear shifting and speed adjustment.
Explains the operation of the remote control lever for gear shifting and speed adjustment.
Explains the operation and positions of the engine ignition switch.
Details the function and operation of the emergency stop switch.
Explains how to adjust the outboard motor's trim and tilt angle.
Describes the function of the oil pressure warning system.
Explains the function of the overheat warning system.
Provides steps for securely mounting the outboard motor.
Provides guidelines for connecting the battery cables safely.
Covers recommended oil type, inspection, and refilling procedures.
Provides step-by-step instructions for starting the engine with tiller control.
Provides step-by-step instructions for starting the engine with remote control.
Specific starting procedures for R2 and R3 remote control types.
Explains how to start the engine using the emergency starter rope.
Details warning systems like oil pressure, overheat, PGM-FI, and ACG.
Details the procedure for stopping the engine in an emergency using the kill switch.
Step-by-step guide for cleaning and flushing the outboard motor.
Schedule outlining periodic maintenance tasks and intervals.
Details oil change intervals, capacity, and recommended oil types.
Covers spark plug inspection, adjustment, and replacement.
Information on battery handling, inspection, and cleaning.
Instructions for propeller inspection, replacement, and removal.
Procedures for servicing an outboard motor that has been submerged.
Lists symptoms of warning systems and their possible causes and remedies.
Technical specifications for the BF40D K4 model.
Technical specifications for the BF50D K4 model.
To Next Page