Do you have a question about the HONDA marine BF75D and is the answer not in the manual?
Full Throttle RPM Range | 5, 000-6, 000 RPM |
---|---|
Valve Train | SOHC |
Ignition System | MicroComputer Programmed |
Starting System | Electric |
Cooling System | Water Cooled |
Lubrication System | Wet Sump |
Gear Ratio | 2.33:1 |
Trim Range | -4° to +16° |
Tilt Range | 70° |
Steering | Remote |
Fuel Tank Capacity | External |
Displacement | 1496 cc |
Bore & Stroke | 73 mm x 89.4 mm |
Rated Power | 75 HP @ 5500 RPM |
Fuel Delivery | PGM-FI |
Shaft Length | 20 in |
Wiring for Tachometer, Trim Meter, Volt Meter, and Hour Meter.
Wiring for Emergency Stop, Power Trim/Tilt, and Combination Switches.
Connections for the Engine Control Module (ECM) and ignition coils.
Wiring for crankshaft, camshaft, MAP, TP, oil pressure, and temperature sensors.
Wiring for fuel pump, fuel injectors, and Idle Air Control (IAC) valve.
Wiring for the battery, alternator, and regulator/rectifier.
Wiring for the starter motor, main relay, and power tilt relay.