Need help?Do you have a question about the HONDA marine BF135A and is the answer not in the manual?
General| Brand | HONDA marine |
|---|---|
| Model | BF135A |
| Category | Outboard Motor |
| Language | English |
Introduction to the shop manual, including service information and safety guidelines.
Defines safety alert symbols and signal words like DANGER, WARNING, and CAUTION.
Correlation of Diagnostic Trouble Codes (DTCs) with detected units and probable problem parts.
Troubleshooting steps when the Malfunction Indicator Lamp (MIL) does not illuminate.
Diagnostic procedure when the MIL is on but no Diagnostic Trouble Code is displayed.
Troubleshooting steps for initial faults in the vehicle's alert system.
Procedure for diagnosing issues with the neutral position switch.
Steps to troubleshoot problems with the tachometer readings.
Diagnostic procedures for the Engine Control Module (ECM) failures.
Troubleshooting steps for the Manifold Absolute Pressure (MAP) sensor.
Diagnostic procedures for the Crankshaft Position (CKP) sensor.
Troubleshooting steps for Engine Coolant Temperature (ECT) Sensor 1.
Diagnostic procedures for the Throttle Position (TP) sensor.
Troubleshooting steps for the Camshaft Position (CMP) sensor.
Diagnostic procedures for the Intake Air Temperature (IAT) sensor.
Troubleshooting steps for the Barometric Pressure (BARO) sensor.
Diagnostic procedures for the Idle Air Control (IAC) valve.
Troubleshooting steps for the Variable Valve Timing Electronic Control (VTEC) solenoid valve.
Diagnostic procedures for the Knock Sensor.
Troubleshooting steps for the Air-Fuel Ratio (A/F) sensor heater.
Diagnostic procedures for the Air-Fuel Ratio (A/F) sensor.
Troubleshooting steps for Engine Coolant Temperature (ECT) Sensor 2.
Diagnostic procedures for the Engine Coolant Temperature (ECT) Sensor 3.
Troubleshooting steps for the Engine Oil Pressure (EOP) switch.
Diagnostic procedures for the Engine Coolant Temperature (ECT) Sensor 4.
To Next Page
