Need help?Do you have a question about the Honda 08E51-SV4-100-F and is the answer not in the manual?
Factors affecting remote control range like proximity to buildings and weak batteries.
Avoid extreme temperatures and submerging the remote transmitter in water.
Proper battery usage, checking, replacement, holding ring, and cleaning the remote transmitter.
Contact dealer for replacement and reprogram other remotes if a transmitter is lost.
Explanation of the LOCK, UNLOCK, and OPTION buttons on the remote transmitter.
Functions of the OPTION and PANIC buttons and their operation.
How the LED indicates button presses, signal transmission, and battery condition.
Step-by-step guide for replacing the lithium battery in the remote control transmitter.
Detailed procedure for programming up to four remote control transmitters to the system, covering all steps.
Explanation of the Arming Mode and Horn/Siren selector switches on the main unit.
Description and sensitivity adjustment of the glass breakage detector microphone.
Functionality of the Disarm/Valet switch for disarming, valet mode, and sensor recall.
Explains the three arming methods: Auto Lock, Automatic, and Manual (Remote Controlled).
Step-by-step guide for arming the system using the remote control transmitter.
Automatic arming 20 seconds after the last door is closed, without simultaneous locking.
Automatic arming and door locking 20 seconds after the last door is closed.
What happens when the alarm is triggered, including sounds, lights, and starter disable.
Overview of two disarming methods: Remote Controlled Disarming and Disarm/Valet Switch Disarming.
Procedure for disarming the system using the UNLOCK button on the remote control transmitter.
How to disarm the system using the Disarm/Valet switch, especially during an active alarm.
How to disarm the system by turning the ignition switch to ON during the entry delay.
How to activate the panic function using the PANIC button on the remote transmitter.
How to stop the panic function by pressing specific buttons on the remote transmitter.
Procedure to place the system in valet mode using the Disarm/Valet switch.
Procedure to exit valet mode using the Disarm/Valet switch.
How the system indicates a tripped sensor when disarmed or after rearming.
How to identify which sensor was tripped by observing LED flashes after disarming.
Procedure to recall the last sensor that triggered the alarm from memory.
Description of the soft chirp siren accessory for arming/disarming confirmation.
Description of the hood switch accessory for added protection.
Information about adding additional remote control transmitters to the system.
Definitions for terms like Alarm Duration, Arm, Auto Lock Arming, Automatic Arming, Manual Arming, Disarm, Entry Delay Time, Exit Delay Time.
Definitions for terms like Extended Exit Arming, Panic, Relock, Sensor Cancellation, Tripped Sensor Indication, Last Tripped Sensor Recall, Tripped Sensor Warning, Valet.
To Next Page
General
