Honda Automobile Accessories User Manual

© 2000 American Honda Motor Co., Inc - All Rights Reserved. All 21624 (0008) 1 of 12
INSTALLATION
INSTRUCTIONS
08E55-S84-1000-91
Accessory Application Publications No.
Issue Date
AUG 2000
2001 ACCORD
2- AND 4-DOOR
(INCLUDES V6)
SECURITY SYSTEM
PARTS LIST
Security System (sold separately):
P/N 08E51-S84-100
2 Remote controls
Security System Attachment (sold separately):
P/N 08E55-S84-100
Security system
wire harness
Control unit
LED
Push nut
2-Pin connector (for LED)
Disarm switch
Window decal
3-Pin connector
(for disarm switch)
Nut, 12 mm
Washer
Owner’s Manual
2 Washer-screws, 4 x 30 mm
Sub-harness
White connector clip
Control unit bracket
2 Relay brackets
5 Short wire ties
3 Washer bolts, 6 x 12 mm
Ground bolt
3 Flange nuts, 6 mm
3 Self-tapping screws
Y0581-A
All 21624

Honda Automobile Accessories Specifications

General

Brand	Honda
Model	Automobile Accessories
Category	Car Alarm
Language	English

Summary

System Components and Preparation

Parts List

Lists all components included in the Security System package.

Tools and Supplies Required

Lists necessary tools and supplies for installation.

Installed System Illustration

Visual diagram showing the final placement of system components.

Control Unit Configuration and Initial Steps

Adjusting the Control Unit

Details on setting mode, horn/siren, and sensitivity.

Initial Installation Procedures

Customer information, battery disconnection, and console cover removal.

Vehicle Panel Removal

Instructions for removing dashboard and door sill panels.

Component Installation and Wiring

LED and Disarm Switch Installation

Routing and securing the LED and disarm switch.

Control Unit and Antenna Mounting

Mounting the control unit bracket and unit.

Harness Routing and Fuse Box Connections

Connecting security system wire harness to fuse box.

Relay and Fuse Case Assembly

Assembling fuse cases and positioning relays.

Final Connections and System Checks

Securing Wire Harnesses

Securing the security system wire harness with ties.

Sub-harness Connections

Connecting the sub-harness to the vehicle harness.

Final Steps and Operation Check

Reinstalling parts, reconnecting battery, and testing.