Honda 08E60-SCV-100 User Manual

© 2005 American Honda Motor Co., Inc. - All Rights Reserved. AII 28670 (0501) 1 of 2
INSTALLATION
INSTRUCTIONS
Accessory Application Publications No.
Issue Date
JAN 2005
08E60-SCV-1000-91
2005 ELEMENT
KEYLESS ENTRY
P/N 08E60-SCV-100
PARTS LIST
Receiver unit
INSTALLATION
Customer Information: The information in this
installation instruction is intended for use only by
skilled technicians who have the proper tools,
equipment, and training to correctly and safely add
equipment to your vehicle. These procedures
should not be attempted by “do-it-yourselfers.”
1. If equipped, make sure you have the anti-theft
code for the radio, then write down the radio
station presets.
2. Disconnect the negative cable from the battery.
3. Remove the driver’s dashboard lower cover, turn
the knobs clockwise, then pull the driver’s
dashboard lower cover out toward you to release
the six retaining tabs.
2 Transmitters
Bracket
Flange bolt
Owner’s manual
TOOLS REQUIRED
Ratchet
10 mm Socket
Illustration of the Keyless Entry Installed in the
Vehicle
AII 28670
2709050K
RECEIVER
UNIT
2403050K
RETAINING
TABS (6)
KNOB
DRIVER’S
DASHBOARD
LOWER
COVER

Honda 08E60-SCV-100 Specifications

General

Brand	Honda
Model	08E60-SCV-100
Category	Car Alarm
Language	English

Summary

Parts List

Installation Procedure

Customer Information and Initial Steps

Provides customer guidance, anti-theft code, and initial steps like battery disconnection.

Dashboard Cover Removal and Receiver Mounting

Details removing the dashboard cover and mounting the receiver unit bracket.

Receiver Unit Connection and Wiring

Instructs on connecting the receiver unit to the vehicle harness and checking wiring.

Final Assembly and System Checks

Covers reassembling components, reconnecting battery, and verifying keyless entry function.