© 2013 American Honda Motor Co., Inc. – All Rights Reserved. AII 13148-49239 (1302) 27 of 27
How to Program an Additional Transmitter
1. Connect the HDS to the data link connector.
2. Start the HDS and click on the car icon.
3. Input the vehicle’s VIN and other required
information.
4. Select Honda Systems.
5. Select R/C ENG STARTER.
6. Select REGISTER NEW TRANSMITTER.
7. When “Ready to program the new transmitter”
shows, select ENTER.
8. Press and release the Command button.
9. Press and release the Stop button.
10. Perform the function check on both transmitters.
NOTE: Only 2 remotes can be stored in the system’s
memory.
To Previous Page
Loading...
