Adjust the front seats forward as
far as they will go. Pull up the seat-
back angle adjustment lever and
pivot the seat-back backward.
Release the lever when the seat-
back is level with the rear seat
cushion.
Move the front seat backward
until it touches the rear seat.
Adjust the rear seat-back to the
desired position.
Reverse this procedure to return the
front and rear seats to the upright
position. Make sure you install the
head restraints and the seats are
locked securely before driving.
When you return the seat-back to
the upright position, hold the seat-
back to keep it from going up too
quickly.
2. 3. 4.
Seats
Instruments and Controls
98
SLIDE BAR
SEAT-BACK ANGLE
ADJUSTMENT LEVER
０３／０３／０４ １９：４０：３２ ３１ＳＣＶ６００ ０１０３
To Next Page
Loading...
