CONTINUED
Locate the jacking point nearest
thetireyouneedtochange.Itis
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch.
Use the extension and wheel
wrench as shown to raise the
vehicle until the flat tire is off the
ground.
Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the wheel facing up.
Placing the wheel face down could
mar its finish.
9.
10.
11.
Changing a Flat Tire
Taking Care of the Unexpected
279
EXTENSION
WHEEL WRENCH
JACKING POINTS
０３／０３／０４ ２０：０８：３８ ３１ＳＣＶ６００ ０２８４
To Next Page
Loading...
