#
ID number input
You can input your ID number by pressing the
ignition switch when the ignition switch is OFF,
LOCK and SEAT FUEL position. Input the ID
number on the ID tag in order from the left in
turn by pressing the ignition switch.
The ID number is authenticated according to
the number of times the ignition switch is
pushed.
Push the ignition switch the desired number
of times within 5 seconds when the ignition
switch ring comes on. After 5 seconds, the
ignition switch ring goes off and comes on
again. This means that the inputted number
is fixed, and you can input the next number.
u
If the ignition switch ring does not come
on in blue, the battery may be low.
Contact your dealer.
Example:
● To input “0”, wait for 5 seconds without
pushing the ignition switch when the
ignition switch ring comes on.
● To input “1”, push the ignition switch once
within 5 seconds when the ignition switch
ring comes on.
20200227172533_31K0WA000_enu_BOOK Page 113 Thursday, February 27 2020 17:31:25 JST
Unlock the Ignition Switch in an Emergency
Troubleshooting
110
To input “0”
To input “1”
ID number
Ignition switch
No push
Ignition switch
ID number
Push one time
To Next Page
Loading...
