35
8. OPERATION
Operation
Break-in Procedure
Break-in operation allows the mating
surfaces of the moving parts to wear
evenly and thus ensures proper
performance and longer outboard
motor life.
Break-in your new outboard motor as
follows.
For the first 10 hours of operation,
run the outboard motor at low speed,
avoid prolonged full-throttle speed,
and avoid abrupt operation of the
throttle.
1. Steering
To change the direction of the boat to
the right, swing the steering handle to
the left. To turn to the left, swing the
steering handle to the right.
For smooth steering, adjust the
steering friction bolt so that a slight
drag is felt when turning.
To Next Page
Loading...
Need help?
General
