7. STOPPING THE ENGINE
Emergency engine stop
Disengage the emergency stop switch
EMERGENCY ENGINE
clip from either emergency engine stop STOP SWITCH 1
switch 1 or 2 by pulling the emergency
stop switch lanyard.
It is a good idea to stop the engine with
the emergency stop switch lanyard from
time to time to be sure that the switch is
operating properly.
EMERGENCY STOP SWITCH CLIP
Normal engine stop
1. Move the control lever to the N
(neutral) position.
2.Turn the ignition key to the OFF
position.
When the boat is not in use, remove
and store the ignition key.
@e&al)
CONTRO
LEVER
IGNITION KEY
18