Need help?Do you have a question about the Honda CB250N DELUXE and is the answer not in the manual?
Always make a pre-ride inspection before starting the engine to prevent accidents or equipment damage.
The engine stop switch (2) is for emergencies. Normally place it in the RUN position.
Perform the oil change while the engine is still warm. Drain oil, replace filter, fill with new oil.
Maintain proper brake fluid level. Check for leaks and worn pads.
Inspect brake pads visually to determine wear. Replace if worn to the red line.
General| Compression Ratio | 9.2:1 |
|---|---|
| Fuel System | 2x Keihin Carburetors |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Front Brake | Single disc |
| Rear Brake | Drum |
| Front Tire | 3.00-18 |
| Rear Tire | 3.50-18 |
| Bore x Stroke | 62.0 mm x 41.4 mm |
| Max Power | 27 hp (20 kW) @ 9, 000 rpm |
| Frame | Steel |
| Rear Suspension | Dual shocks |
| Height | 1, 100 mm |
To Next Page
