Need help?Do you have a question about the Honda CB250N and is the answer not in the manual?
General| Compression Ratio | 9.2:1 |
|---|---|
| Ignition | CDI |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Rear Suspension | Dual shocks |
| Front Brake | Single disc |
| Rear Brake | Drum |
| Seat Height | 780 mm |
| Cooling System | Air-cooled |
| Power | 20 kW (27 hp) @ 9500 rpm |
Detailed technical specifications for the motorcycle model.
Essential safety precautions for performing maintenance and operation.
Scheduled maintenance intervals and required services.
Procedure for removing and installing the engine oil pump.
Steps for removing and installing the carburetor assembly.
Detailed steps for removing and installing the engine.
Steps for removing and installing the cylinder head assembly.
Steps for removing and installing clutch and primary drive gear.
Procedure for separating and assembling the engine crankcase.
Steps for removing and installing the transmission assembly.
Steps for removing and installing the front wheel.
Procedure for removing and installing the front fork assembly.
Procedure for checking and adjusting ignition timing.
Diagnosing common starter motor and clutch issues.
Diagnosing starting issues: fuel, spark, and compression.
Troubleshooting steps for reduced engine power.
To Next Page
