Need help?Do you have a question about the Honda cb450 1974 and is the answer not in the manual?
General| Displacement | 444 cc |
|---|---|
| Bore x Stroke | 70.0 mm x 57.8 mm |
| Compression Ratio | 9.0:1 |
| Ignition | Battery and Coil |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Rear Suspension | Dual shocks |
| Front Brake | Single disc |
| Rear Brake | Drum |
| Engine Type | 4-stroke, parallel twin |
| Horsepower | 45 hp @ 9000 rpm |
| Torque | 38 Nm @ 7000 rpm |
| Wheelbase | 1, 410 mm |
| Seat Height | 800 mm |
Welcomes the user and introduces the manual's purpose and safety information.
Details essential safety information for pump operation, refueling, and hazards.
Covers hot exhaust, carbon monoxide, and general safety during use.
Illustrates the location of important safety labels on the pump.
Identifies the location of all major pump components and controls.
Explains the function and operation of each control like fuel valve, ignition, choke, throttle.
Explains significant features such as the Oil Alert system.
Guides the user on getting ready and ensuring the pump is prepared for operation.
Details the necessary checks for the pump, hoses, and engine before starting.
Outlines essential safety rules for operating the water pump.
Covers pump placement and suction/discharge hose installation.
Step-by-step guide for starting, running, and stopping the engine.
Emphasizes the necessity of maintenance and associated safety precautions.
Outlines the recommended service intervals for various pump components.
Procedures for refueling, fuel recommendations, and engine oil checks/changes.
Instructions for inspecting, cleaning, and replacing air filters and spark plugs.
Covers sediment cup cleaning, idle speed adjustment, and spark arrester service.
Steps to prepare the pump for storage, including cleaning and fuel management.
Guidance on using fuel stabilizers and draining the fuel tank for storage.
Safety measures for storing the pump and precautions regarding vapor ignition.
Instructions for safely transporting the water pump, including cooling and fuel valve position.
Diagnosing and resolving issues like engine not starting or lacking power.
Addressing problems such as no pump output or low pump output.
Details serial number location and carburetor adjustments for high altitude.
Information on oxygenated fuels and emission control systems.
Detailed specs for WD20X/WD30X models and performance curves.
Lists available publications, shop manual, and parts catalog.
Contact details and procedures for customer service inquiries.
A concise overview of fuel, oil, spark plug, and maintenance details.
To Next Page
