Adjusting the Rear Suspension
❙
Spring Preload
You can adjust the spring preload by the
adjuster to suit the load or the road surface.
Turn the adjuster using the pin spanner and
extension bar provided in the tool kit
(
2 P. 57).
Use the pin spanner and extension bar to
turn the adjuster. Positions 1 is a decrease
spring preload (soft), or turn the position 3 to
7 increase spring preload (hard). The
standard position is 2.
Attempting to adjust directly from 1 to 7 or 7
to 1 may damage the shock absorber.
Do not attempt to disassemble, service, or improperly
dispose of the damper. See your dealer.
To Next Page
Loading...
