Remove the rear brake adjusting nut ( ),
disconnect the brake rod ( ) from the
brakearm( )bypushingdownonthe
rear brake pedal.
Raise the rear wheel off the ground by
placing a support block under the engine.
Loosen the drive chain lock nuts ( ) and
adjusting nuts ( ).
Remove the drive chain from the drive
sprocket by pushing the rear wheel
forward.
Remove the rear wheel.
Removetherearaxlenut()while
holding the rear axle at the other end
with a wrench.
Pull out the rear axle shaft ( ).
1.
2.
3.
4.
5.
(1)
(3)
(4)
7.
6.
(2)
(5)
(7)
(6)
(4)
(5)
4
6
5
1
2
37
(1) Adjusting nut
(2) Brake rod
(3) Brake arm
(4) Lock nuts
(5) Adjusting nuts
(6) Rear axle nut
(7) Rear axle shaft
Rear Wheel Removal
79
03/10/23 11:15:31 32KPF600_085
To Next Page
